On July 3, 2018, Yueqing, Zhejiang Province, the new machine was delivered and commissioned, 110 tons of 3.2 m 3 + 1 axis electro-hydraulic servo CNC bending machine.

微信图片_20180704100243

The weather was a bit bad when the new plane arrived at the customer’s side.

微信图片_20180704100236

Fortunately, the machine was brought into the room before the heavy rain, and it did not get a drop of rain. After all, it was metal. It would not be good to rust if the new machine got caught in the rain.

微信图片_20180704100234

In the room, only the machine can be moved by the translation wheel. The master is inexperienced and does not drag mud and water when moving.

微信图片_20180704100211

Because the horizon is very good, the debugging becomes simple and smooth after the machine is installed.

微信图片_20180704100142

Hardly had the machine been debugged before customers could wait to get on board.

微信图片_20180704100255

The first workpiece is out of the furnace. The four corner seams are very small and there is no pressure in welding.