This time, we will introduce the advantages of CNC bending machine. I hope you can understand the advantages of CNC bending machine in more detail through this article.
The advantages of CNC bending machine are as follows:
1. High precision-bending accuracy is the best way to check the bending machine, the accuracy is less than 0.5 degrees. In the same procedure, each step can be bended accurately.
2. Good synchronization-using electro-hydraulic synchronization principle structure, with excellent synchronization performance.
3. Fast speed – hydraulic system has fast down function in the process of operation, pressure to the point, and servo motor is also used for back stopper. It has fast speed and accurate positioning.
4. Easy to operate – This kind of NC system is almost intellectualized. It has angle programming (graphical programming), automatic calculation of bending pressure, automatic deflection compensation and multi-point NC positioning of back shield.
5. Low failure rate – Comparing with the complex torsion synchronous mechanical device, the component design is simpler and more effective, so the failure rate is lower. For example, the problem of using imported German ARGO hydraulic system is much smaller.
6. More durable-synchronous structure is simple and compact, which makes the system hardly wear and tear in use.
7. Anti-eccentric load-grating position detection on cylinder side will not be damaged due to eccentric load.

数控折弯机液压比例阀

In addition to the advantages of CNC bending machine, the disadvantages of CNC bending machine are as follows:
CNC bending machine needs good maintenance-because CNC bending machine is a precise hydraulic component and is used under high pressure, so it needs good maintenance to prevent rust, corrosion, dirt, oil deterioration and so on, so it must keep clean and use appropriate hydraulic oil.
Above is the answer to the question about the advantages of CNC bending machine. I hope it will be helpful for those who want to know the advantages of CNC bending machine. If you want to know more about the advantages of CNC bending machine, please consult Shengda Heavy Industry SDMT customer service.

案例2