Today, I will bring you some questions about the application of CNC bending machine on the folding edge of aluminum veneer and some related problems. I hope that some friends who want to understand the application of CNC bending machine on the folding edge of aluminum veneer are helpful.
In the curtain wall industry, aluminum veneers are an indispensable material for high-rise building curtain walls because of their unique texture and good strength.
Because it is applied to high-rise buildings, the requirements for aluminum veneers are unusually high. For the design and construction unit, even if there is a complete drawing on the hand, it is necessary to measure the size of each part with an infrared range finder on site, and verify the data. The inaccuracy of the size of the concealed aluminum veneer can have a great impact.
The curtain wall aluminum veneer has a large number of specifications, and the construction party installs according to the drawing order according to the number of the aluminum veneer manufacturer.
The folding of the aluminum veneer is very important. It not only functions as a joint but also a reinforcing rib of the aluminum veneer to prevent deformation of the panel. The folding edge of aluminum veneer requires high precision. If the folding edge is too small, the narrowest margin of the lower die of the bending machine cannot be reached. The aluminum veneer can not be bent, so the size of the hem should be based on the signing of the aluminum veneer manufacturer. Goods treaty document. In addition, the precision and efficiency of the hemming edge are also the key points. The aluminum veneer generally has a relatively large length, and the thickness of the aluminum plate is generally within 3 mm. Therefore, the bending machine must have a deflection compensation function, so that the angle of the middle position of the aluminum veneer can be calibrated. Shanda Heavy Industry CNC Bending Machine adopts hydraulic deflection compensation with an accuracy of 0.02mm, which can control the accuracy of compensation very accurately. At the same time, it adopts Swiss SB8 system, which has automatic hydraulic deflection compensation function and can also be set manually. The compensation value, very user-friendly design, is the system of choice for the aluminum veneer industry.
The specifications of the curtain wall aluminum veneer are divided into two types: the aluminum veneer with a thickness of 1.2 mm or less is called an aluminum gusset plate (also called an aluminum square plate); the aluminum veneer with a thickness of 1.5 mm or more is called an aluminum veneer. The aluminum veneer curtain wall is made of high-quality high-strength aluminum alloy sheet, and its common thickness is 1.5, 2.0, 2.5, 3.0MM.
The above is the detailed application of the CNC bending machine on the folding of the aluminum veneer. To learn more about the application of the CNC bending machine on the folding of the aluminum veneer, please consult Shanda Heavy Industry SDMT customer service.